Electronic Grade Silicone Sealants & Adhesives

Designed as a 1-part silicone RTV developed for sealing and coating applications. A neutral cure adhesive offers unprimed adhesion and sealing to concrete joints, wood, many metals and plastics.

Great for applications that requires a quick setup and adheres to many different types of substrates.

Exonic Fast Neutral Cure Silicone RTV Sealant

Protective coating for rigid and flexible circuit boards. Fast-curing, one-part, self- priming coating cures to flexible, transparent elastomer ideally suited for electronic printed wiring board applications, particularly those employing sensitive component.

Our non-tin curing Silicone RTV is an excellent choice for applications that require fast development of physical properties and fast unprimed adhesion.

Designed as a liquid con-formal coating to provide environmental protection for printed circuit boards and other sensitive electronic components.

Developed as a fast, neutral curing silicone RTV adhesive engineered for applications requiring fast deep section cures and excellent adhesion. A 2-part, 1:1 mix ratio silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

Developed as a heat curing, high strength silicone RTV adhesive developed for applications requiring a tough clear, low durometer silicone rubber product. 2-part silicone that when heat cured, allows handling of the parts within minutes.

Developed as a heat curing, high strength silicone RTV adhesive developed for applications requiring a tough, low durometer silicone rubber product. 2-part silicone that when heat cured, allows handling of the parts within minutes.

Developed as a heat curing, high strength silicone RTV adhesive developed for applications requiring a tough clear, high durometer silicone rubber product. 2-part silicone that when heat cured, allows handling of the parts within minutes.

Developed as a a fast, neutral curing silicone RTV adhesive engineered for applications requiring fast deep section cures and excellent adhesion. A 2-part, 1:1 mix ratio silicone adhesive that when mixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

Exonic Polymers deep section silicone is a 2-part, Platinum cure RTV silicone sealant designed to reach deep section to provide a complete adhesive. It is a 2-part self-leveling RTV sealant that when mixed, applied and cured, results in a silicone adhesive sealant rubber.

Our 2-part silicone RTV offers excellent adhesion capabilities. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

Exonic Polymers deep section silicone is a 2-part, Platinum cure RTV silicone sealant designed to reach deep section to provide a complete adhesive. It is a 2-part self-leveling RTV sealant that when mixed, applied and cured, results in a silicone adhesive sealant rubber.

Our thermally conductive silicone RTV transfer adhesive rubber developed for heat sink applications.

A high temperature thermal joint compound developed to fill the gaps between heat sinks and substrates.

Exonic Polymers Thermally Conductive Deep Section paste is 2-part, Platinum cure, adhesive sealant silicone RTV that offers great thermal conductivity. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures.

Designed as a liquid con-formal coating to provide environmental protection for printed circuit boards and other sensitive electronic components.

A UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast UV cure. This product is a silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing in shadowed areas.

A performance thermally conductive liquid gap filling material. It is formulated to develop a very soft, form in place elastomer, ideal for coupling hot PC board components to heat sinks. It is supplied as a two part, 1:1 mixed system that will cure at room temperature and can be accelerated with the addition of heat. This product is superior to cured thermal pad material because using a paste approach offers infinite thickness variations with little or no stress to sensitive components during assembly.

Great for applications that require a high strength, heat curing adhesive silicone.

Developed as a fast curing rubber coating engineered for shock dampening and vibration isolation applications. It is a 2-part silicone that when cured, allows handling of the parts within minutes.

Developed as a fast curing liquid silicone rubber RTV-8112 offset developed for potting and encapsulation applications.

A performance thermally conductive liquid gap filling material. It is formulated to develop as a low viscosity liquid that allows the product to self-level in the application. In addition it develops a very soft, form in place elastomer, ideal for coupling hot PC board components to heat sinks. It is supplied as a two part, 1:1 mixed system that will cure at room temperature and can be accelerated with the addition of heat. This product is superior to cured thermal pad material because using a paste approach offers infinite thickness variations with little or no stress to sensitive components during assembly.

A performance thermally conductive liquid gap filling material. It is formulated to develop a very soft, form in place elastomer, ideal for coupling hot PC board components to heat sinks. It is supplied as a two part, 1:1 mixed system that will cure at room temperature and can be accelerated with the addition of heat. This product is superior to cured thermal pad material because using a paste approach offers infinite thickness variations with little or no stress to sensitive components during assembly.

Generally used to fill gap and seams on electrical enclosures for EMI shielding or electrical grounding.

A fast cure RTV rubberized silicone developed for thermally conductive applications. This thermally conductive silicone rubber adheres well to metals and composite substrates.

Generally used in applications that require high thermal conductivity and is non-corrosive.

Designed as an electrically conductive, heat curing adhesive silicone. This 1-part silicone that when applied to the substrate allows handling of the assembly within an hour.