 |
 |
 |
|
Our 1/4-thick D-shaped EPDM sponge rubber seals provide superior protection against water leaks and help dampen noise. The 1153 series D-shaped foam rubber seal is resistant to sunlight degradation and ozone exposure. When installed correctly, the 3/8" x 1/4" D-shaped rubber door seal should be compressed between 1/6" and 1/8" to provide maximum benefit. This seal is most often used in boating applications, RVs, automotive applications, garage doors and weather stripping. The versatile D-shaped EPDM rubber seals are rated for between -20F and approximately +160F.
The 3/8-wide, 1/4-thick D-shaped rubber strips provide a wide base for adhesive. The 3/8-wide D-shaped rubber seal can adhere to a heat-activated tape system (HATS) adhesive that requires curing. The HATS adhesive offers high shear strength, providing a barrier between the substrate and seal. Alternatively, a pressure-sensitive adhesive (PSA) is best used for static applications with no movement. A PSA adhesive requires no curing and is ready to use directly after installation.
- Width: .375"
- Height: .250"
EPDM Rubber
EPDM, Ethylene-Propylene-Diene-Monomer, is well known for its excellent ozone, weathering, and aging resistance. It also has excellent water and steam resistance, maintains its flexibility at low temperatures, features excellent resistance to alkalis, acids, and oxygenated solvents, and is very color stable. It is not recommended for resistance to oil, gasoline, and hydrocarbon solvents. EPDM is found in a wide range of applications and is excellent for use outdoors.
Resistance to:
- Ozone – Excellent
- Water Absorption - Excellent
- Sunlight (UV) - Excellent
- Weatherability - Excellent
- Low Temperature – Excellent (Temp. Rating -20 F Degrees to +160 F Degrees)
- Compression Set - Good
Available with two tape adhesive options:
HATS - 3Mâ„¢ Heat Activated Tape System "HATS" Heat Activated Tape System. This 3M Acrylic Automotive grade tape creates the ultimate bond between the rubber and the ultimate bond to the substrate you are attaching the rubber too. This tape creates a barrier seal for your application. To ensure the strongest possible bond, this product requires a full 72 hours to complete the curing process between the tape and the substrate that it is being attached to.It will have a low initial tack that allows for easy installation and the ability to reposition the seal. Good heat performance -20F to +158F.
PSA - Standard Pressure Sensitive Adhesive Tape
"PSA" Pressure Sensitive Adhesive This acrylic-based adhesive is creates a bond that allows for easy installation of seal or is perfectly suited for a static application that has little to no movement. Good heat performance -20F to +160F. We highly suggest that application is done in a temperature setting over 60 Degrees Fahrenheit.
Common Applications:
- Automobiles (Car door seals, Engine hood seals, trunk seals, etc.)
- Boats (Window seals, Hatch Seals, etc.)
- HVAC
- Recreation Vehicles (RV) (Windows Seals, Door Seals, Slide-Out Seals, etc.)
- Truck Covers
- Windows & Doors
- Garage Doors
- Shaker Screens
- Enclosures (Electrical Enclosures, Electronics Enclosures, Machinery & Equipment Enclosures, Etc.)
- Weatherstripping
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Premium EPDM Rubber D-Seals - Helps protect your boat, RV or car from the outdoors. Prevents water leaks and dampens noise.
- Easy Install - Cleaning the bonding locations is essential to a successful and long-lasting seal. Once clean you can apply the rubber with the adhesion tape to your application
- EPDM is the ideal polymer when exposed to the ozone (outdoors). Rated Excellent in resistance to water absorption, resistances to sunlight, compression rebound and low temperature
- Wide Range of Applications - EPDM D-Seals can be used on your boat, car, RV, trailers, general home seal, hatches and doors, HVAC units, and many other uses.
|
|
|
|
|
|
|
Effective Product 
